User guide

XTS-IP / XTSc-IP Station User Guide December 2005
100 Ring Tone
Off-Hook Preference Programming (Via a Station)
If your phone is programmed for Off-Hook Preference and you were
given the ability to enable or change the prime flexible button:
1. Dial [691] on the dial pad.
2. Dial desired flexible button number (01-30).
To disable Off-Hook Preference:
1. Dial [691] on the dial pad.
2. Dial [00] on the dial pad.
 SINGLE LINE TELEPHONES
Single line telephone users can bypass Off-Hook Preference by
pressing the FLASH button and then dialing their extension
number.
Ring Tone
To select a distinctive ring tone for a station:
1. Dial the Ring Tone program code [695] on the dial pad. The
following message displays:
2. Enter a valid tone number. The speaker will sound a steady tone
that correlates to the 2-digit entry. The 2-digit tone number will
display in the lower left corner of the LCD.
ENTER RING TONES 00-36
XX PRESS SPEED TO SAVE