User guide

PBX/Centrex Codes on a Flex Button 97
XTS-IP / XTSc-IP Station User Guide December 2005
PBX/Centrex Codes on a Flex Button
For one-button access to Centrex or PBX features:
1. Program Centrex or PBX code into a Station or System Speed Dial
bin, including hook-flash (FLASH key), [], and [#] commands (refer
to “Speed Dial” on page 104).
2. Program that speed bin onto a flexible button (refer to “Flexible
Button Programming” on page 62).
Release Button
The Release Button feature allows the station user to speed up call
handling time by disconnecting calls while being off-hook.
Using the handset, while off-hook (not the speakerphone):
Press the preprogrammed RELEASE button [641] to terminate
intercom call, transfer sequence, page announcement or CO call.
Redial
Last Number Redial
To use Last Number Redial, either:
Press the preprogrammed LAST NUMBER REDIAL button (code 650).
-or
Press the SPEED button, then press the pound [#] key.
-or-
Use the Soft Key’s LNR option when in an idle condition.
-or-
Press the REDIAL button on an IP-24DH Phone.