User guide

XTS-IP / XTSc-IP Station User Guide December 2005
92 Personalized Messages
To cancel a pre-assigned message:
1. Either dial the Personal Messages code [633] + [00], dial [662], or
press the DND button.
2. Replace the handset. The DND button LED will extinguish.
Custom Messages
Each station can select from ten possible custom messages to display
on the LCD of a key telephone calling that station. These messages are
programmed from the first Attendant station for system-wide use.
Each station can also program
three unique custom messages.
To select a custom message:
1. Dial [633] on the dial pad,
-or-
Press a preprogrammed PERSONAL MESSAGES button.
2. Dial a valid message number (21-30) for the desired custom
message.
The first Attendant should provide a list of messages to each station
user.
To program a unique custom message:
1. Dial [633] on the dial pad.
2. Dial a valid message number (18-20) for your custom message.
3. Enter a custom message, up to eight characters.
4. Press the HOLD button to save the message.
To use a unique custom message:
1. Dial [633] on the dial pad.
-or-
Press a preprogrammed PERSONAL MESSAGES button.
2. Dial a valid message number (18-20) for your custom message.
The Custom Messages feature is not available for use by
Attendant stations.