User guide

Message Wait 83
XTS-IP / XTSc-IP Station User Guide December 2005
 SINGLE LINE TELEPHONE
To leave a message waiting indication:
1. Lift the handset.
2. Dial the desired intercom station.
3. If you do not receive an answer, or a DND tone sounds, press
the FLASH button.
4. Dial [623].
5. Hang up.
To answer a message waiting indication:
You have a message waiting for you, when your message waiting
lamp is flashing or there is an interrupted dial tone when you lift the
handset.
1. Lift the handset.
2. Dial [663]. The station that left message will ring.
Conditions
» 8-button digital display telephones must use the Soft Key’s MSG
option to leave a message waiting indication and must use [663] to
answer a message waiting indication.
» 8-button digital non-display telephones cannot leave a message
waiting indication, but they can use [663] to answer a message
waiting indication.