Specifications

3-14 Power Supply Unit Installation
Chapter 3 - System Installation
XTS-IP - Installation Manual December 2005
Power Capacity
The power capacity of the PSU is as follows:
Before Installation -- Ensure that the AC plug connected to Cabinet 0 is NOT plugged into
the AC outlet.
1. Place the PSU in the left-most slot in Cabinet 0, aligning the card guides with the PSU PCB
and PSU frame flanges.
2. Slide the PSU into place using the ejectors to seat the PSU fully in the Cabinet.
3. Then affix the PSU to the Cabinet with the two screws provided.
Figure 3-8: PSU Installation
+5V DC -5V DC +30V DC Battery Charging Current
10A 1.5A 8.4A 1A