Specifications

System Configuration Tables 2-13
Chapter 2 - System Specifications
XTS-IP - Installation Manual December 2005
Table 2-15: Digital Station Visual Signals - Feature/Function Buttons
Feature/Function Flash Rate LED Color
Call Forward (active) Steady Red
Message Wait (active) Steady Red
Camp On (active) 120 ipm Flash Red
Call Back (active-initiator) 120 ipm Flash Red
CO Line Queue (active) 480 Flutter Red
DND (active) Steady Red
Mute Steady Red
On/OFF Steady Red
Conference Steady Red
Speed (moment on until bin address dialed) Steady Red
Personalized Messages 15 ipm Flash Red
Tone Intercom Call (Hold button) 15 ipm Flash Red
Loop same as CO Green/Red
Pool same as CO Green/Red
Transfer 60 ipm Flash Green
Table 2-16: Signals to Called Station (Digital Station)
Feature (Indication) Sound in Hz
Occurrence - Cadence
(in seconds unless otherwise indicated)
Incoming CO Line (*user selectable) 0.4 on/0.4 off/0.4 on/2.0 off
Intercom Tone Ringing (*user selectable) 0.8 on/2.4 off; Repeated
Intercom Call Announce (H & P) 935 0.2 on/0.2 off; (2 bursts)
Transferred CO Line (*user selectable) 0.2 on/0.2 off; (2 bursts)
CO Line Recall (*user selectable) 0.2 on/0.6 off; Repeated
Message Waiting Call Back (*user selectable) 0.8 on/2.4 off; Repeated
Queued CO Line Call Back (*user selectable) 0.2 on/0.6 off; Repeated
Camp On 935 0.8 second burst
Alarm Tone - Repeated 701/857 1.0 on/.25 off; Repeated
Alarm Tone - Single (Continuous) 701/857 1.0 on; (once every 30-60 seconds until alarm is reset)
* Only one (1) tone can be selected by a station at a time. This tone is used for all signaling that uses the “User
Selectable” tone.