Specifications

2-8 System Configuration Tables
Chapter 2 - System Specifications
XTS-IP - Installation Manual December 2005
Table 2-7: Electrical Specifications
Item
Specification
Power Supply
AC Voltage Input
AC Power
AC Input Fuse
DC Output Voltage
120 or 220 +/- 10% Volt AC @48-63Hz
350W
5.0 amp @ 220Volt AC
+ 5V @ 10A, - 5V @ 1.5A, + 30V @ 8.4A
Battery Backup
Input Voltage
Battery Fuse
Charging Current
24Volt DC
12.5amp @250Volt AC
Maximum 1A
External Relay Contact 1 amp @24Volt DC
Longitudinal Balance 60 db from 200 Hz to 1,000 Hz
40 db from 1000 Hz to 4000 Hz
Idle Channel Noise Less than 15 dbrnco for all connections
Cross Talk Attenuation Greater than 75 dbm Station to CO and Station to Station
Single Frequency Distortion
(300 - 3400 Hz)
Station to CO Line and station to station:
Better than 2.0% or 34 db for an
Output level -30 dbm to 0 dbm
Ringing Detect Sensitivity 40Vrms @16-30Hz
30Vrms @30-37Hz
Ringer Equivalence Number (REN) LCOB: 0.8B; DIDB: 0.0B; T1IB: 6.0P
Co Line Signaling - DTMF Frequency pair at ±5dbm
Frequency tolerance ±1.5%
CO Line Signaling - Dial Pulse 10 pps and 20 pps programmable
Input Level Range +10 db maximum
Music Source
Music-On-Hold input
Background Music input
600Ω input at Ødbm maximum from music source
600Ω input at Ødbm maximum from music source
External Page Port
Output Impedance
Output Power w/o Compression
600Ω @ 0dbm
5 milliwatt max
CSA File Number (NRTL/C) LR57228
Telephone Transmitter Electret mic compatible