Specifications

VoIP Maintenance and Troubleshooting 4-53
Chapter 4 - Maintenance and Troubleshooting
XTS-IP - Installation Manual December 2005
Trace Setting Mode -- From the main menu, type [t] to access the Trace Setting Mode. The
following screen will display:
Figure 4-18: VoIP Trace Setting Printout
 Select a Trace Setting option and press <Enter> to change the status.
(example: [t] <space> [s] <space> [a] is used to set a trace for all events)
 Type [b] at the trace> prompt to return to the main menu.
Network Troubleshooting -- From the main menu, type [n] to access Network
Troubleshooting. The following screen will display:
 Select a troubleshooting option and press <Enter>.
To use the Ping Function, type: p<space>xxx.xxx.xxx.xxx, then press <Enter>.
Ping is a standard network troubleshooting method to determine if a particular node is
operating correctly.
COMMAND DESCRIPTION STATUS (Y=On)
----------------------------------------- (N=Off)
t a Trace all Y
t c MP-PP Command N
t m MP-PP Event N
t h H.323 Command N
t e H.323 Event N
t s [m|h|a] Set [MP-PP|H.323|All] Cmd/Evt
t r [m|h|a] Reset [MP-PP|H.323|All] Cmd/Evt
b Return Back
x Exit
? Help, Guide
root:\trace>
To view trace information, you must exit [x] the administration menus.
COMMAND DESCRIPTION
-------------------------------------
t ip_address Traceroute
p ip_address Ping Function
c ip_address CID Function
u ip_address User-to-User Function
b ip_address Return Back
x Exit
? Help, Guide
root:\net>