Specifications

VoIP Maintenance and Troubleshooting 4-51
Chapter 4 - Maintenance and Troubleshooting
XTS-IP - Installation Manual December 2005
Entering 8-Port VoIP Card Administration Menus
1. Attach a straight-through cable to the VoIP card (RS-232) and use the following
HyperTerminal (or other terminal emulation application) settings:
Baud - 9600 bps (changeable to higher rates after initial access)
Data Bits - 8
Parity - None
Stop Bit - 1
Flow Control - None
2. Press <Enter> and wait for the password> prompt.
3. Type the Admin password (3226vodavi = default password), the main menu will display:
Figure 4-12: VoIP Trace - Main Menu
Network Configuration Mode -- From the main menu, type [c] to access Network
Configuration Mode. The following screen will display:
Figure 4-13: VoIP Network Configuration Printout
Refer to “VoIP24 Upgrade Procedure” on page 4-61 for information on VoIP24
Upgrade and Entering VoIP24 Card Administrative Menus.
COMMAND DESCRIPTION
-------------------------------------
c Network Configuration Mode
s System / Call Status Mode
t Trace Setting Mode
n Network Troubleshooting
u LAN Firmware Upload Mode
y Show Type of Service Value
r Reset LAN Card
x Exit
? Help, Guide
root:\net>
COMMAND DESCRIPTION STATUS (Y=On)
------------------------------------(N=Off)
r r Read All Y
r a Read IP Address N
r s Read Subnet Mask N
r g Read Gateway N
r d Read Domain Name N
r n Read DNS Address N
r m Read MAC Address N
b Return Back
xExit
? Help, Guide
root:\net>