Specifications

Nomad RSGM Software Upgrade 4-43
Chapter 4 - Maintenance and Troubleshooting
XTS-IP - Installation Manual December 2005
10. Type ?, then press Enter to access the help menu.
11. Type /, then press Enter to return to the main menu (Root Catalog).
12. Type reset, then press Enter.
main:/wan/wanset> ?
================================================================
Command Description Mode
================================================================
/ Change to Root Catalog
.. Change to Parent Catalog
mode Toggle Address Config Mode : FIXED
get all Read All Parameters
get [arg] Read [arg] Parameter
{ip|subnet|gateway|dns|host|domain|
mac|blimit|mlimit}
set ip [ipaddr] Write (Fixed Mode) IP Address
set subnet [ipaddr] Write (Fixed Mode) Subnet Mask
set gateway [ipaddr] Write (Fixed Mode) Gateway Address
set dns [ipaddr] Write (Fixed Mode) DNS Address (..|del)
set host [string] Write (Fixed Mode) Host Name (..|del)
set domain [domain] Write (Fixed Mode) Doamin Name (..|del)
set blimit [digt] Write Broadcast Limit(%) (1-100)
set mlimit [digt] Write Multicast Limit(%) (1-100)
main:/wan/wanset>
main:/wan/wanset> /
==========================================================
Command Description
==========================================================
wan Change to WAN Configuration
lan Change to LAN Configuration
system Change to System Configuration
status Change to System Status
trace Change to Trace Options
passwd Change Password
reset Reset RSGM
exit (or x) Exit Monitor Mode
help (or ?) Display Help on Menu
main:>