Specifications

Upgrade IP Phone Software 4-39
Chapter 4 - Maintenance and Troubleshooting
XTS-IP - Installation Manual December 2005
"Clear the IP Phone Password" -- Use the following procedure to clear the IP Phone password
in cases where the password has been forgotten. This will allow access to the IP Phone web
access, where you can reset a new password in the security section.
1. Unplug the IP Phone from the network and connect it to a port unrelated to the system to
gain the following display.
2. Press [*] to get into the Set mode.
3. Press the volume up/down button to select the WEB PASSWORD menu.
If a web password is in effect, the web password menu will display the following.
If a web password is not in effect, the web password menu will display the following.
4. Press[#] to clear the web password.
5. Plug the IP phone into the network port.
6. Enter the IP address of the IP Phone to enter web administration for the phone without
using a password.
7. Use the Security area to assign a new password, if desired.
NO RESPONSE FROM MFIM [L]
SET[*] - RETRY[#]
WEB PASSWORD
[SET] - CLEAR[#]
WEB PASSWORD
[NOT SET]