Specifications

4-20 Maintenance Access
Chapter 4 - Maintenance and Troubleshooting
XTS-IP - Installation Manual December 2005
DTMF Receiver Trace
The CONFIG utility allows technicians to take specific DTMF receivers in/out of service. This is
useful for troubleshooting DTMF receiver problems to isolate a specific DTMF receiver that may
be faulty.
To view the status of all DTMF receivers in the system:
1. Connect a terminal to I/O Port 1 on the MPB.
2. At the Enter Password> prompt, type config, then press <Enter>.
3. Then type: d<space>r<Enter>
The display will show the receiver number, cabinet location, card slot location, receiver
status, and state of the receiver.
To make a receiver unavailable:
Type: d<space>rXX<Enter>
(XX is the specific receiver number to make unavailable)
To make a receiver available:
Type: d<space>rXX<Enter>
(XX is the specific receiver number to make available)
maint> d r
RCVR CAB SLOT STAT USER
---- --- ---- ---- ----
00 0 09 INS IDLE
01 0 09 INS IDLE
02 0 09 INS IDLE
03 0 09 INS IDLE
04 0 07 INS IDLE
05 0 07 INS IDLE
06 0 03 INS IDLE
07 0 03 INS IDLE
08 0 03 INS IDLE
09 0 03 INS IDLE
10 0 02 INS IDLE
11 0 02 INS IDLE
12 0 02 INS IDLE
13 0 02 INS IDLE
maint>