Specifications

Maintenance Access 4-15
Chapter 4 - Maintenance and Troubleshooting
XTS-IP - Installation Manual December 2005
CO/Station Configuration
This illustration shows what is printed out when the installer types d<space>s0 at the
maint>prompt.
Figure 4-3: Remote Maintenance - CO/Station Configuration
STA (Station)
FLEX-FIX-PORT Shows the flexible and fixed numbers that were assigned to each available port.
TYPE Shows the type of telephone being used by a station.
STATUS
 Out-of-Service (OOS) status can indicate the entire card is out of service; or a
specific station is not installed; or a station is installed but not operational.
 In-Service (INS) status can indicate a specific station is installed and operating
correctly.
LCD Indicates whether or not the station has a telephone with an LCD Display.
STATE Shows the condition of each station: idle/available/unavailable.
Type of Station (keyset, DSS, SLT)
Keyset - ID 0 = Key station
DSS/BLF - ID 1 = DSS Map 1
DSS/BLF - ID 2 = DSS Map 2
DSS/BLF - ID 3 = DSS Map 3
DSS/BLF - ID 4 = DSS Map 4
SLT - ID 5 = SLT
SLT w/Lamp - ID 6 = SLT w/Message Waiting
maint>d s0
CAB/SLOT CARD CKTS SERV STAT BRD OPTS FW VER.
--------- ---- ---- ----------- ---------- ---------
0 0 DTIB 12 INS 0 00-0
STA
FLEX-FIX-PORT TYPE STATUS LCD STATE
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
110-110-010 30BTN INS Y IDLE
111-111-011 30BTN INS Y IDLE
112-112-012 30BTN INS Y IDLE
113-113-013 30BTN INS Y IDLE
114-114-014 30BTN INS Y IDLE
115-115-015 30BTN INS Y IDLE
116-116-016 30BTN INS Y IDLE
117-117-017 30BTN INS Y IDLE
118-118-018 30BTN INS Y IDLE
119-119-019 30BTN INS Y IDLE
120-120-01a 30BTN INS Y IDLE
121-121-01b 30BTN INS Y IDLE
maint >