Specifications

IP Phones and Related Items 3-85
Chapter 3 - System Installation
XTS-IP - Installation Manual December 2005
12. Type /, then press Enter to return to the main menu (Root Catalog).
13. Type reset, then press Enter.
IP Module - AC/DC Adapter
Each module is packaged with an AC/DC adapter. The adapter is supplied with a two-meter
(six-foot) AC cord terminated with the nationally relevant AC blade type. The adapter
supports AC input power systems with rated voltage range of 100-240 VAC @ 50/60 Hz. The
adapter provides 48 VDC at 0.8 amps. The DC output connector is cabled to the adapter with
a two-meter (six-foot) cable as shown in the following illustration.
Figure 3-51: AC/DC Adapter for IP Module
main:/wan/wanset> /
==========================================================
Command Description
==========================================================
wan Change to WAN Configuration
lan Change to LAN Configuration
system Change to System Configuration
status Change to System Status
trace Change to Trace Options
passwd Change Password
reset Reset RSGM
exit (or x) Exit Monitor Mode
help (or ?) Display Help on Menu
main:>