System information

2-222 Privacy Release
Chapter 2 - Features and Operation
Per Station Option
Description
The system provides privacy on all communications in the system which prevents other
stations from accidentally entering an existing conversation. However, the system provides
the ability for a station to join an existing outside CO line conversation (on a per station
basis). Each station can be granted the privilege to join an existing CO line conversation by
simplypressingtheCOlinebuttonofaCOlineinuse.
Privacy on an SLT can be useful in situations where a modem is using the SLT port for data
transmission.Disabling this feature lets data transfer proceed without being interrupted with
a Camp On tone. Both the station and the CO Line must have Privacy disabled before the
system allows cut-through.
 If Privacy is disabled and a station joins an existing call, a programmable warming tone is
presented to both parties prior to actual cut-through.
 If Privacy is disabled, up to seven other stations may join in on an existing conversation.
Privacy is enabled for all stations in default.
Programming Steps
1. Press FLASH and dial [50]. Flexible button #24 (New Range) is lit and the following
message displays:
2. Enter the range of station numbers to be programmed. If only one station is being
programmed, enter that number twice (100 100).
Table 2-19: Station Privacy Flag
Station Attempting to
Access CO Line
CO Line in Use by Another Station
Privacy Enabled Privacy Disabled
Privacy Enabled Private
(No Cut-through)
Private
(No Cut-through)
Privacy Disabled Private
(No Cut-through)
Privacy Released
(Cut-through Allowed)
STATION ATTRIBUTES
SELECT A STATION RANGE
If HOLD is pressed without entering a station range, ALL stations are selected.