Specifications

KEY TELEPHONE SYSTEM
630.2 TIMERS
PROGRAMMING STEPS
If you are in the program mode, continue using the
program codes. If you are starting to program here,
enter the program mode first.
A. Exclusive Hold Recall
To change this timer, dial an (*) asterisk and [22] on
the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Enter the three-digit timer value on the dial pad
(000-255) which corresponds to 000 to 255
seconds. An entry to 000 will disable the timer.
2. When all changes have been made, press the
HOLD button. Confirmation tone will be heard
and the display will now update.
B. System Hold Recall
To change this timer, dial an (*) asterisk and [23] on
the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Enter the three-digit timer value on the dial pad
(000-255) which corresponds to 000 to 255
seconds. An entry to 000 will disable the timer.
2. When all changes have been made, press the
HOLD button. Confirmation tone will be heard
and the display will now update.
DESCRIPTION
This reflects the time before an outside line placed
on exclusive hold will recall the initiating station. If
the call is unanswered for an additional equal
amount of time, it will recall the attendant and if
unanswered by the attendant will recall all phones in
the system.
Default: By default, the Exclusive Hold Recall Timer
is set at 060 seconds.
Disable: An entry to 000 will disable the timer.
This timer reflects the amount of time before an
outside line placed on system hold will recall the
initiating station. If the call is unanswered for an
additional equal amount of time, it will recall the
attendant and if unanswered by the attendant will
recall all phones in the system.
Default: By default, the System Hold Recall Timer
is set at 060 seconds.
Disable: An entry to 000 will disable the timer.
ISSUE 1, JANUARY 1991
630-3