Specifications
STARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
SECTION 630
SYSTEM CONFIGURATION
630.1
SYSTEM FEATURES
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starling to program
here, enter the program mode first.
To change any system feature, dial an asterisk (‘)
and 1211 on the dial pad.
If you have a display phone, you will see the follow-
ing:
1.
2.
Toggle the program buttons ON or OFF, de-
pending on the desired features.
l
If LED is ON, feature is enabled
l
If LED is OFF, feature is disabled
When all changes have been made, press the
HdLD button. Confirmation tone will be heard.
I/II//
FLEXIBLE BUlTON FIELD
SUB-FIELD BUllONS
DESCRIPTION
The System Configuration features are as follows:
Line Queuing
If this button is lit, CO line queuing is allowed on a
system basis. Stations queuing a line are recalled
according to the line group requested.
Default: By default, Queuing is allowed at all sta-
tions (LED ON)
Related Programming:
Refer to CO line group programming since queuing
follows line groups, not individual lines, Sec. 620.1.
Also, refer to Flexible button programming for ac-
cess to individual lines or groups of lines, Sec. 610.5.
Hold Preference
The system can be programmed to have either
exclusive hold or system hold preferred. If exclusive
hold is preferred, the HOLD button is pressed once
for exclusive hold and twice for system hold when
placing a call on hold.
For system hold this is
reversed.
Transfer and conference calls are always placed on
exclusive hold.
Default: By default, Hold Preference is defaulted to
system hold (LED ON).
Related Programming:
Refer to system timer programming for recall times
for both system and exclusive hold.
Alarm Detection
This feature determines the type of alarm signal
received from an external source. If the LED is lit, it
means the system will detect a closed loop, unlit
means the system will detect an open loop.
Default: By default, Alarm Detection is defaulted to
closed loop (LED ON).
Related Programming:
Refer to Station Configuration, Station Features 1,
Sec. 610.2, alarm/phone box signaling to determine
who will receive alarm signals. Also refer to signaling
and alarm enable/disable in this section.
Note: A flex button can be assigned for monitoring
the alarm.
ISSUE 1, JANUARY 1991 630-l