Specifications

620.7
RING TIME-OUT TIMER
PROGRAMMING STEPS
DESCRIPTION
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
If the Ring Time-out Timer needs to be changed, dial
an asterisk (*) and [18] on the dial pad.
If you have a display phone, you will see the follow-
ing:
This feature is used to assign the Ring Time-out time
the system will use for detecting the end of a valid
ring cycle.
Default: By default, the Ring Time-out timer is set at
5.0 seconds.
Related Programming:
1. Enter the two-digit timer value on the dial pad
(40-99) which corresponds to 4.0 to 9.9 sec-
onds.
2. When all changes have been made, press the
HOLD button. Confirmation tone will be heard
and the display will now update.
620-6
ISSUE 1, JANUARY 1991
.-_ ,