Specifications

sTARPLUS@

616 FLEX

KEY TELEPHONE SYSTEM

620.6

DIAL PULSE

PROGRAMMING STEPS ,

If pulses per second (pps) and break/make ratios

need to be changed, press the (*) & dial [17] on the

dial pad.

If you have a disolav ohone. vou will see the follow-

ing:

Press CO line button for line which is to be

assigned dial pulse.

Then press the appropriate program button.

When all changes have been made, press the

HOLD button. The next CO Line will automat-

ically be presented for programming.

DESCRIPTION

Each CO (outside) line can send dial pulse signals

to the receiving central off ice. The break/make ratio

and pulses per second are programmable.

Default: Default is 10 DDS and 60/40 breaWmake

ratio. Default assigns

ali

60 lines as DTMF.

Related Programming:

This program code is only used when an outside

(CO) line has been programmed for dial pulse. Refer

to CO Line Settings, Alarm Signaling, Sec. 620.2.

When used in Canada, DOC regulations do NOT

allow dial pulse signaling speed to exceed 11

pps with a minimum of 33 msec. make interval

and 54-68 msec. break interval. These require-

ments are met when the system database is

initialized.

/I/)////

FLEXIBLE BUlTON FIELD

SUB-FIELD BUITONS

ISSUE 1, JANUARY 1991 620-7