Specifications

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM
620.5 CO RING DETECT
PROGRAMMING STEPS DESCRIPTION
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
If CO Ring Detect timer is to be changed, dial an
asterisk (‘) and [i 61 on the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Press CO line button for which timer will work.
2. Enter the one-digit timer value on the dial pad
(2-9) which corresponds to 200 to 900 millisec-
onds.
3. When all changes have been made, press the
HOLD button. The next CO Line will automat-
ically be presented for programming.
FLEXIBLE SUTTON FIELD
SUB-FIELD EIUlTONS
Theduration of the ringing signal from the CO or PBX
is matched with ringing detection circuitry in the
KSU. The ring detect can range from 200 - 900
milliseconds divided into 100 msec. increments.
Default: Default value for each line is 300 msec.
Ring detect time is programmed on a per CO line
basis.
Related Programming:
When programming the CO Ring Detect timer, Refer
to CO line Settings, Alarm Signaling, Sec. 620.2; and
CO Line ringing programming, Sec. 620.3.
6206 ISSUE 1, JANUARY 1991
..: -F