Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
620.4
FLASH TIMER
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
If the flash timer is to be changed, dial an asterisk (*)
and [ 151 on the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Press the CO line which is to be programmed
(see following program buttons).
2. Enter the two-digit timer value on the dial pad
(01-99) which corresponds to 0.1 to 9.9 sec-
onds.
3. When all changes have been made, press the
HOLD button. The next CO Line will automat-
ically be presented for programming.
FLEXIBLE BUTTON FIELD
SUB-FIELD BUTTONS
DESCRIPTION
Flash is a programmable opening on a line for sig-
naling. When using an outside line, flash allows a
user to obtain new dial tone without losing the line.
This is particularly useful behind a PBX or Centrex.
Refer to CO Line Settings, Sec. 620.2; Line Type).
Each CO line is individually programmed for a flash
time. The flash timer is programmed on a per line
basis.
Default: By default, the Flash Timer is set at 2.0
seconds on all lines.
ISSUE 1, JANUARY 1991
620-5