Specifications

STARPLUS@

616 FLEX

KEY TELEPHONE SYSTEM

620.3 CO LINE RINGING

PROGRAMMING STEPS

If you are in the programming mode, continue using

the program codes. If you are starting to program

here, enter the program mode first.

Dial an asterisk (*) and [13] on the dial pad for day

ringing stations (14 for night ringing stations).

If you have a display phone, you will see the follow-

ing:

DESCRIPTION

Telephones can be assigned to receive incoming

outside line ringing during the day and/or during the

night.

Telephones that ring during the day do not automat-

ically ring at night. They require night ringing pro-

gramming.

Any number of phones can be assigned to ring

during the day and/or during the night.

Program Code 14 operates the same as Program

Code 13 and is used to assign night ringing stations.

Default: By default, all lines ring at Station IO in both

day & night mode.

Related Programming:

At least one station should be programmed to ring

on a line. Refer to Flexible Button Programming,

Sec. 610.5. Make sure that any station programmed

for Loud Bell Control is assigned ringing for that line.

Press outside line that is to be programmed.

Then press station buttons for stations that are

to ring on that line (each button will light).

When all stations have been entered, press the

HOLD button to enter data. The next CO Line

will light for programming.

FLEXIBLE BUrrON FIELD

SUB-FIELD BUrrONS

620-4 ISSUE 1, JANUARY 1991