Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
SECTION 620
CO LINE CONFIGURATION
620.1
CO LINE GROUPS
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
To assign CO line groups, dial an asterisk (‘) and
[l l] on the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Press the CO line as indicated in the program
buttons below.
2. Then press the button for the CO line group into
which that CO line is to be placed.
3. When all changes have been made, press the
HOLD button.
Continue programming CO lines until they have all
been placed in a group.
FLEXIBLE BlJlTON FIELD
SUB-FIELD BUTtONS
DESCRIPTION
Six (6) line groups are available for CO line assign-
ment. Trunk Groups should be assigned according
to type (local, FX, WATS, etc.).
Line grouping at7ecf.s queuing; if you queue on a line,
any line in that same group may be made available
to you.
Line groups are used primarily for flexible buttons
assigned as pooled group buttons, Sec. 610.5
Default: All CO Lines are assigned to Group 1.
ISSUE 1, JANUARY 1991
620-l