Specifications
STARPLUS* 616 FLEX
KEY TELEPHONE SYSTEM
610.2 STATION FEATURES 1
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first (Sec. 600.4).
If station features are to be changed, dial an asterisk
(‘) and [02] on the dial pad.
If you have a display phone, you will see the follow-
ing:
1.
2.
3.
Press the button of the station to be pro-
grammed.
Toggle the following program buttons ON or
OFF, depending on what features that station
is to be given.
l
If LED is ON, feature is enabled
l
If LED is OFF, feature is disabled
When all changes have been made, press the
HOLD button. The next station button will light
for programming.
SUB-FIELD BUlTONS
DESCRIPTION
Station features are described as follows:
Do Not Disturb (DND)
A yes entry (LED on) indicates this station is allowed
the Do Not Disturb feature. The programmed Atten-
dant cannot have DND.
Default: Do Not Disturb is enabled at all Stations
(LED ON)
Speed Dial (System)
A yes entry (LED on) indicates this station is allowed
access to system speed dial numbers. The last 20
numbers (bins 30-49) are not monitored by toll re-
striction. Refer to toll restriction tables, Sec. 630.13,
and programming system speed numbers, Sec.
630.19.
Default: Speed Dial access is enabled at all Stations
(LED ON)
Alarm/Phone Box Signaling
The system can transmit an alarm signal to all avail-
able (non-busy) keysets which have been pro-
grammed to receive an audible signal. The LED on
indicates the alarm is enabled; if unlit it is disabled.
In the event of an alarm condition, the system must
be reset by first clearing the alarm condition on the
external system and then dialing the alarm reset
code on the dial pad.
These stations will also receive an alert tone from a
phone box.
NOTE: A STATION BUTTON MUST BE AS-
SIGNED TO PHONES RECEIVING PHONE BOX
RINGING, Refer to Sec. 670.5
Related Programming:
Refer to Sec. 630.1 to enable alarm signaling and to
program alarm detection & signaling.
Default: Alarm/Phone Box Signaling is disabled at
all Stations (LED OFF)
Preferred Line Answer
Stations can be given the ability to answer incoming
outside line calls, transferred & recalling lines and
line queues by simply going off-hook.
Default: Preferred Line Answer is disabled at all
Stations (LED OFF)
r.ln rt
1441
IF
1
.IANIIARY
l!XH