Specifications
STARPLUS’@
616 FLEX
KEY TELEPHONE SYSTEM
360.46 PHONE BOX SIGNALING
lf you hear signals on your telephone, it may be a
signal from a phone box.
1. Press station button programmed for that
phone box.
2. Lift handset or use speakerphone to converse.
3. Hang up to end call.
If no station button has been programmed, you may
dial the phone box intercom number to answer the
call.
300.49 UNIVERSAL NIGHT ANSWER (UNA)
You hear an outside line ringing at another station
and wish to answer it:
1. Lift handset.
2. Dial [!%I] on the dial pad.
OR
3. Press programmed flex button.
4. You will be connected to the ringing outside
line.
300.50 HEADSET MODE
If you wish to use a headset and have been given
the ability to do so in programming.
To activate Headset mode:
- Dial [41] on the dial pad.
OR
- Press programmed flex button. LED will
light steady.
While Headset mode is active, the ON/OFF button
will activate the headset and disable speakerphone
operation.
To de-activate Headset mode:
- Dial [41] on the dial pad.
OR
- Press programmed flex button. LED will ex-
tinguish.
.
ATUBES.
300.51 NIGHT SERVICE
At Attendant station:
1. Press FWD/DND button at that sta-
tion.(FWD/DND LED lights steady)
2. Press FWD/DND button again to remove Night
Service.
El
NOTE
Attendant does not have DND feature.
300.52 SETTING SYSTEM TIME AND DATE
At programmed Attendant station:
1. Lift handset or press ON/OFF button.
2. Press SPD button.
3. Press asterisk (‘) once.
4. Dial [50].
5. Enter date & time as follows:
YYMMDDHHMM
- W = year 80-99
- MM = month 01-12
- DD = day 01-31
- HH = hour 00-23
- MM = minute 00-59
6. Press HOLD button to enter data.
300.53 STORING SYSTEM SPEED NUMBERS
1.
2.
3.
4.
5.
6.
7.
8.
Lift handset or press ON/OFF button (option-
ally)
Press SPD button.
Press asterisk (*) key once.
Dial two-digit speed bin location.
-1 O-49 = System speed numbers
Select desired outside line or one will be chosen
automatically.(up to 16 digits)
Dial telephone number.(O-9,
l
, #)
[‘I DP to DTMF switchover. (for first occur-
rence only. Subsequent ‘*’ dialed will cause
the DTMF digit ‘+’ to be dialed.
TRANSQUE button= inserts a pause during
number storage.
FLASH key= inserts a flash into the speed
number.
CONF button= “No Display”.
Press HOLD button to enter the number. Con-
firmation tone is heard.
Hang up.
Note: System speed numbers can only be entered
at the Attendant station.