Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
300.37 STORING STATION SPEED NUM-
1.
2.
3.
4.
5.
6.
7.
8.
BERS
Lift handset or press ON/OFF button (option-
ally)
Press SPD button.
Press asterisk (*) key once.
Dial two-digit speed bin location.
- 00-09= Station speed numbers;
- 90-99= Station speed numbers.
Select desired outside line or one will be chosen
automatically.(up to 16 digits)
Dial telephone number.(O-9, *, #)
l [*I DP to DTMF switchover. (for first occur-
rence only. Subsequent ‘*’ dialed will cause
the DTMF digit I*’ to be dialed.
l TRANSKYJE button= inserts a pause during
number storage.
0 FLASH key= inserts a flash into the speed
number.
l CONF button= “No Display”.
Press HOLD button to enter the number. Con-
firmation tone is heard.
Hang up.
300.38 DIALING A SPEED NUMBER
If no outside line has been specified in programming,
one will be chosen automatically or you can choose
one now.
1. Press SPD button
Then:
2. Dial two-digit speed bin location.
- 00-09= Station speed numbers.
- 1 O-49= System speed numbers.
- 90-99= Station speed numbers.
OR
Press programmed speed bin button.
3. When called party answers, lift handset or use
speakerphone.
300.39 LAST NUMBER REDIAL
There are 3 methods of using Last Number Redial.
Method 1: (DO NOT select a CO Line)
1. Press pound (#) key. The last number dialed
over an outside line will be automatically be
redialed.The system will automatically select
the original line used to place the call and redial
the number.
Method 2: (Select a CO Line)
1. Select the desired CO Line.
2. Press SPD button.
3. Press pound (#) key. The last number dialed
over an outside line will be redialed on selected
CO line.
Method 3: (Programmed LNR flex button)
1. Press programmed LNR flex button. The sys-
tem will automatically select the original line
used to place the call or the line chosen and
redial the number.
300.40 PAGING
Stations off-hook or in DND will not hear the page.
1. Lift handset or press ON/OFF button. (optional)
2. Dial 2-digit paging code
- 70 Internal All Call
- 71 Internal Zone 1
- 72 Internal Zone 2
- 73 External Zone
- 74 All Call
OR
Press programmed flex button.
3. Speak in normal tone of voice to deliver mes-
sage.
4. Hang up.
300.41 MEET ME PAGE
You wish to have another party call vou.
1.
2.
3.
4.
Dial [74] on the dial pad
OR
Press programmed flex button.
Request that party meet you on the page.
DO NOT hang up; wait for the requested party
to answer.
300.42
ANSWERING A MEET ME PAGE
1. Go to the nearest keyphone:
2. Dial [75]
OR
3. Press programmed flex button.
4. You will be connected to the party that paged
you.