Specifications

BARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
- H mode, you will hear 3 bursts of tone and
an announcement. Reply handsfree or lift
handset for privacy. Hang up or press
ON/OFF button to end call.(Upper switch
position)
I
NOTE
If you have a programmed station button for
the calling party, that button will flash. If you
receive a call from a phone box, you must
press that station button to answer the call.
300.17 CAMP ON
You call a station that is busy and wish to alert them
to your call,
1. Press the MSG/CP.ON button twice. Called
station will receive two bursts of ringing.
2. Wait for their response.
El
NOTE
If a station is in DND, only the attendant can
camp-on.
300.18 ANSWERING A CAMP ON
If you are on a connected call, hear 2 bursts of muted
ringing and your MSG/CP.ON button is flashing, you
have a call waiting for you. To answer:
1. Press the MSG/CP.ON button. Any outside line
you are connected to will be placed on hold.
Intercom calls will be disconnected.
2. You may converse with the station placing the
call.
300.19 LEAVING A MESSAGE WAITING INDI-
CATION
Up to 5 messages can be left at any one key tele-
phone.
If you dial a station that is busy, unattended or in
DND, you can leave a callback message indication.
1. Press the MSG/CP.ON button once. Called
party’s MSG button will slow flash.
2. Hang up.
300.20 ANSWERING A MESSAGE WAITING
INDICATION
The first message left will be the first one called.
lf your MSG/CP.ON button is flashing at a slow rate,
YOU have a message waiting for you.
1. Lift handset.
2. Press flashing MSG/CP.ON button. Station that
left message will be signaled with tone ringing.
If called station doesn’t answer:
1. Press MSG button once to leave message.
300.21 CALL TRANSFER
q Outside lines can be transferred from one phone
to another within the system.
q The transfer can be either screened (announced)
or unscreened to either an idle or busy station.
300.22 SCREENED TRANSFER
While connected to an outside line:
1.
2.
3.
4.
Press station button where call is to be trans-
ferred (if programmed on your phone)
OR
Press TRANS button and dial station number
(1 O-25). The called extension signals according
to the intercom signal switch position.
When that extension answers, announce the
transfer.
Hang up to complete transfer.
300.23 UNSCREENED TRANSFER
Once the called extension begins to signal
1. Hang up to transfer the call. (Recall timer
starts.)
300.24 TRANSFER SEARCH
When attempting to locate a party:
1. Press a station button to signal a station. If the
party is not located, press another station but-
ton to continue the search.
OR
2. Press the TRANS button and dial the station
number. If the party is not located, press the
TRANS button again & dial another station to
continue the search.
3. When the called party answers, hang up to
complete the transfer.
300.25 ANSWERING A SCREENED TRANS-
FER
Your intercom will be signaling according to the
intercom signal switch position.
1. Answer the intercom and receive transfer no-
tice.
2. Press the outside line button or loop button
flashing on hold.