Specifications

$iTARPLUS@ 616FLEX
KEY TELEPHONE SYSTEM
300.7 MUTE BUTTON (optional)
Provides privacy during speakerphone or handset
operation by disabling the microphone.
1. Press the programmed mute button*, while off
hook to activate. (LED lights)
2. Press the programmed mute button again to
deactivate. (LED extinguishes)
*A flexible button MUST be programmed to operate
this feature.
300.6
BACKGROUND MUSIC (optional)
To activate Background Music:
1. Dial [8] on the dial pad (music is heard).
OR
2. Press programmed flex button. (music is heard)
To de-activate Background Music:
1. Dial [8] again and music is discontinued.
OR
2. Press programmed flex button again and music
is discontinued.
When you prck up the handset or press the ON/OFF
button, music is discontinued automatically.
300.9 PLACING OUTSIDE LINE ON HOLD
Cl If your system is programmed to have exclusive
hold preferred, press HOLD button once for ex-
clusive hold and twice for system hold.
•I If your system is programmed to have system
hold preferred, press HOLD button once for sys-
tem hold and twice for exclusive hold.
300.10 ANSWERING A RECALL
When an outside line has remained on hold for an
extended period of time, you will be reminded with a
recalling ring.
1. Press outside line button flashing at very fast
rate.
2. Lift handset to converse.
300.11 FLASH
Disconnects present outside line and reseizes out-
side line dial tone.
While connected to an outside line (PBX or Centrex:
1. Press FLASH button.
300.12 PBWCENTREX TRANSFER
While connected to an outside line (PBX or Centrex):
1. Press FLASH button. PBXKentrex transfer dial
tone is heard.
2. Dial destination station number.
3. Hang up to complete transfer.
The CO line Flash Timer must be programmed for
proper PBWCentrex transfer operation.
300.13 CALL PICK-UP
You must be in the same pick-up group as the ringing
telephone to pick up the call. Tone ringing intercom
calls only can be picked up.
You hear an unattended phone ringing:
1. Dial a [6] on the dial pad.
OR
2. Press programmed flex button.
You will be connected to the calling party.
1. Converse Handsfree or lift handset for privacy.
2. Hang up to end call.
300.14 CALLING TONE MODE OPTION
Allows a calling station to override a called stations’
H or P intercom switch settings.
When placing a call to a station and Tone ringing is
desired:
1. Dial [5#].
2. Dial the two-digit station extension. (call tone
rings station)
300.16 PLACING AN INTERCOM CALL
At your station:
1. Press the station button of the party you wish
to call (if programmed at your phone).
OR
2. Lift handset and dial station number (10-25).
You will hear:
- Ringing if called station is in ‘7” answering
mode.
- 3 bursts of tone if called station is in “H” or
“P” position.
3. Lift handset or use speakerphone when tone
bursts stop.
4. Hang up to end call.
300.16 ANSWERING AN INTERCOM CALL
With your intercom signal switch in the:
- T mode, you will hear repeated intercom
tone ringing & your HOLD button will slow
flash. Lift handset or press ON/OFF button
to answer. Hang up or press ON/OFF but-
ton to end call.(Center switch position)
- P mode, you will hear 3 bursts of tone & a
one way announcement. The HOLD but-
ton will slow flash. Lift handset or press
ON/OFF button to reply. Hang up to end
call.(Lower switch position)
300-4
ISSIISl..IANlIARV
lQQ1