Specifications
adapter box. Speakerphone operation is disabled
while a station has enabled headset operation.
This feature can be programmed onto a flexible
button to indicate and also change the desired mode
of operation.
200.48 HOLD PROVISIONS
The following hold conditions are available in the 616
FLEX system:
A.
8.
C.
D.
Hold - System
Any call can be placed on hold and retrieved
by any station with access to that line.
Hold - Exclusive
Any call can be placed on hold and retrieved
only by the initiating station.
Hold Preference
The system can be programmed to have
either system hold or exclusive hold assigned
as the hold preference.
Hold Recall Timers
Calls placed on hold are capable of being
timed to recall. The exclusive and system
hold recall timers are separately programmed.
200.49 INTERCOM SIGNALING SELECT
The key telephone user can select the method of
receiving intercom calls at their station. A slide
switch located on the telephone is used to select the
mode. The choices are:
l
Tone Ringing (T). A standard tone ring noti-
fies the party of an incoming call. The called
station answers by lifting the handset.(Cen-
ter switch position)
l
Privacy (P). The station user receives a tone
burst and a voice announcement over the
speaker. The microphone is deactivated,
providing privacy. The person who is called
must lift the handset to get the call or switch
the selector to handsfree. (Lower switch po-
sition)
l
Handsfree (H). The station user, upon hear-
ing a tone burst & voice announcement over
the speaker, can reply handsfree (“H” posi-
tion). (Upper switch position)
(Basic model key telephonesdo not have this feature
and will operate as if the switch were in the “P”
position.)
STARPLUS@
616 FLEX
KEY TELEPHONE SYSTEM
programmed for one button page operation by the
station user.
200.51 INTERNAL ZONE PAGE
Stations programmed to make pages can make
voice announcements to idle stations in either one
of the 2 internal zones separately. A flexible button
can be programmed for one button page operation
by the station user.
200.52 LAST NUMBER REDIAL (LNR)
This feature permits the automatic redialing of the
last number dialed on an outside line including a
number in speed dial. This feature can be used on
the same line as originally dialed, on a line within the
same group, or on a different line.
200.53 LCD INTERACTIVE DISPLAY (LCD)
The 616 FLEX system supports key telephones that
are equipped with a liquid crystal display (LCD)
which provides the user with a visual indication of
call status. The display is a two-line, forty eight
character format. The display is arranged into an
upper and lower field. The upper field (24 characters)
displays the current activity on the telephone. The
lower field (24 characters) is divided into 2 sections
(12 characters each), and provides information ac-
cording to call activity.
200.54 LOOP BUTTON CO LINE ACCESS
A station not having a direct appearance for a CO
line transferred to it will receive that CO line under
the Loop button. Only one call at a time can be
connected to a keyset on the Loop button. If more
than one Loop button is programmed on a keyset,
the Loop buttons may be conferenced together. If all
programmed Loop buttons on a keyset are busy or
have a CO call on hold, the party attempting to
transfer a CO line to that station will receive busy
tone and cannot transfer the call to that station. If a
transfer is attempted, the CO line will recall the
initiator immediately and the transfer recall timer will
start.
When multiple loop buttons appear on a key tele-
phone and multiple CO lines are transferred to that
station, the first CO line connects to the highest
number flexible button assigned as a Loop button.
CO line connection is made from highest to lowest
assignment.
200.50 INTERNAL ALL CALL PAGE
Stations programmed to make pages can make
voice announcements to idle stations in both internal
zones at the same time. A flexible button can be
200.55 LOUD BELL CONTROL (Contact)
One (1) control contact can be assigned to a station
for the purposes of providing External Ringing
known as Loud Bell Control. The contact will operate
in cadence with the intercom tone ringing or CO
ringing of the assigned station. This control contact
may be optionally assigned as CO Line Control.