Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
Table 780.3 - CO Line Functions Test
nPFRATlONA1 TEST RESULT
PROCEDURE
-. -* .~ . . .-. _. .- . -- .
I. Outgoing calls
I .I Lift handset or press ON/
1 .I .l The CO line LED is lit
1 .I. 1 Normal
OFF button & press CO
steady.
line button.
1 .I .2 Station OF/OFF button
1 .I .2 Normal
LED is lit steady. All
stations where DSS is
programmed to appear
are lit steady. Dial tone is
heard.
1 .I .3 CO LED is not lit.
1 .I .3 Check line access
programming.
2. Incoming calls
2.1 Incoming CO ringing
2.2 Press flashing CO line
button.
1 .I .4 Dial tone is not heard.
2.1 .I Co ringing is heard.
2.1.2 CO ringing is not heard
but that line is flashing.
2.1.3 CO line LED or loop
button LED is flashing at
30 ipm.
2.2 CO line LED or loop
button is lit steady.
1 .I .4 Check CO line connections
at RJ-21X on the KSU.
2.1 .I Normal
2.1.2 Check programming for ring
assignment (day/night). Check
CO line connections at RJ-21 X
on the KSU.
2.1.3 Normal
2.2 Normal
3. Transferring a CO line
call
3.1 .I The CO line is placed on
3.1 .I Normal
3.1 During a CO line coversa-
Exclusive Hold automati-
tion, press TRANS/QUE
tally.
and dial station number
3.1.2 CO line LED is flashing
3.1.2 Normal
to which CO line is to be
at transferring station but
transferred or press that
remains steady at all
station’s DSS button.
other stations having line
access.
3.1.3 At receiving phone, the
CO line or loop button
LED is flashing at
Exclusive Hold.
3.1.3 Normal
3.1.4 Hang up after dialing
station number or pressing
DSS button for unscreened
transfer; announce call
to receiving station before
hanging up for screened
3.1.4 Normal
ISSUE 1, JANUARY 1991
700-5