Specifications
sTARPLUS@
616 FLEX
KEY TELEPHONE SYSTEM
SECTION 640
DATABASE PRINTOUT
Station Configuration
The Station Configuration printout will provide sta-
tion related information in a !%character field in the
following format:
STA CONFIG
CKT NUM COS DND SPD ALM PFL
0110 1 Y Y N N
CF DSLT PAGE BNA PKUP PAC HST
Y
Y 1,. . . 1,. Y N
CKT NUM COS DND SPD ALM PFL
02 11 1 Y Y N N
CF DSLT PAGE BNA PKUP PAC HST
Y Y 1,. . . 1,. Y N
and so on through the rest of the stations
CKT
NUM
cos
DND
SPD
ALM
PFL
CF
DSLT
PAGE
BNA
PKUP
PAC
HST
= The two-digit circuit number (KSU
physjcal port)
=The ‘two-digit intercom number
assigned to this KSU port
=The one-digit class of service as-
signment
=“Y” enabled DND; “N” disabled
DND at that station
=‘Y” allows system speed dial; “N”
disables system speed dial
=“Y” allows alarm tone/Door Box
ringing; “N” disables it
=‘v enables Preferred Line opera-
tion; “N”disallows it
=“Y” allows Station Call Forward-
ing; “N” disallows it
=“Y” enables Direct Select opera-
tion; “N” disables it
=Valid data is “1” or “2” or both “1”
& “2” indicating page zone(s)
=Valid date is “10” through “25”
indicating the Busy/No Answer
preset forward station assigned
=Valid data is “1” or “2” or both “1”
& “2” indicating Pickup Groups.
=“Y” enabled station paging ac-
cess; “N” disables it
=“Y” enables headset operation;
“N” disables it
CO tine Configuration
The CO Line Configuration will provide CO line
related information in the following format:
CO CONFIG
CO GRP TYPE SIGL TRO PVL FLSH
01 1 CO DTMF N N 20
RDT DIAL-PLS SMDR
3 60/40;10 Y
DAY RING:
10 . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
NIGHT RING:
10 . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
and so on through the rest of the CO lines
CO
GRP
TYPE
SIGL
TRO
PVL
FLSH
RDT
DIAL-PLS
SMDR
DAY RING
NIGHT RING
=The CO line number as it is termi-
nated on the system
=The CO line group this CO line is
assigned to
= Valid data is “CO” or “PBX”
=;;I;: data is “DTMF” or “Dial
I
=“Y” enablesToll Restrict Override;
“N” disables it
=“Y” enables a Private Line; “N”
disables it
=Valid entries for Flash Timer are
“01” through “99”
=Valid entries for Ring Detect
Timer are “2” through “9”
= Valid entries are:
1) 60/40; 10
2) 66/33; 10
3) 60/40; 20
4) 66/33; 20
= “Y” enables SMDR; “N” disables
SMDR
=Stations assigned to ring in the
day mode for this CO Line. Unas-
signed numbers are shown as two
dots “..”
=Stations assigned to ring in the
night mode for this CO Line. Un-
assigned numbers are shown as
two dots “..”
ISSUE 1, JANUARY 1991
640-l
--. _