Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
630.12 SYSTEM TIME & DATE FORMAT
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
If you wish to change the format of the LCD display,
dial an asterisk (‘) and [39] on the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Press the desired program button to determine
the display format.
l If LED(s) is on, 12 hr, MM/DD/YY format is
enabled
l If LED(s) is off, 24 hr, DD/MM/YY format is
enabled
2. When all changes have been made, press the
HOLD button. Confirmation tone will be heard.
I/Ii/I/
FLEXIBLE BUllON FIELD
SUB-FIELD BUITONS
DESCRIPTION
This program controls the LCD display format of the
time and date.
This feature requires that a Real Time Clock Unit
(KU) be installed. Refer to Sec. 500.18 or installa-
tion instructions.
The actual time and date is programmed at the
attendant station.
Default: By default, the time is set at the 12 hour
clock with a range of 1-l 2 (LED ON).
This feature can be changed so the range is 00
through 24 (military time).
Default: By default the date will read
month/day/year (LED ON). The date can be
changed to read day/month/year.
630-l 6
ISSUE 1, JANUARY 1991