Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
630.11 DATA BASE PRINTOUT
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
If you wish to print out a copy of the data base, or
any part of the data base, dial an asterisk (*) and [38]
on the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Press one of the following program buttons
depending on what information is needed in the
printout.
2. Press the HOLD button to begin printing. Con-
firmation tone will be heard.
uuuu
FLEXIBLE BUITON FIELD
SUB-FIELD BUITONS
DESCRIPTION
This feature requires the Serial Interface Unit (SIU)
be installed in the KSU. Refer to Sec. 500.19 for
installation instructions.
A printer must be connected to the RS-232C port of
the KSU for a data base printout.
Refer to Section 640 for Data Base printout exam-
ples and definitions.
ISSUE 1, JANUARY 1991 630-l 5