Specifications

STARPLUS@

616 FLEX KEY TELEPHONE SYSTEM

630.9

CONFERENCE TIMER

PROGRAMMING STEPS

If you are in the programming mode, continue using

the program codes. If you are starting to program

here, enter the program mode first.

If you wish to change the conference timer, dial an

asterisk (‘) and [35] on the dial pad.

If you have a display phone, you will see the follow-

ing:

1. Enter the two-digit timer value on the dial pad

(01-99) which corresponds to 01 to 99 minutes.

2. When all changes have been made, press the

HOLD button. Confirmation tone will be heard.

DESCRIPTION

This timer reflects the amount of time a conference

circuit will remain active if the initiator of the confer-

ence is no longer in a multi line conference.

The Time-out clock is aufomafically reset to zero

whenever the conference initiator fe-enters the con-

ference.

A warning tone will be presented to the remaining

users 15 seconds prior to shutdown.

Default: By default, the Conference Timer is set at

15 minutes.

Disable: An entry of 00 will disable the timer.

636-l 2 ISSUE 1, JANUARY 1991

-’