Specifications

sTARPLUS@ 616 FLEX
KEY TELEPHONE SYSTEM
630.7
PRESET FORWARD RING TIMER
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
If you wish to set this timer, dial an asterisk (‘) and
1331 on the dial pad.
If you have a display phone, you will see the follow-
ing:
1. Enter the two-digit timer value on the dial pad
(01-99) which corresponds to 01 to 99 seconds.
2. When all changes have been made, press the
HOLD button. Confirmation tone will be heard.
DESCRIPTION
This timer determines the amount of time a call will
ring into a station before automatically forwarding to
the predetermined station.
Default: By default, the Preset Forward Ring Timer
is set at 30 seconds.
Disable: An entry of 00 will disable the timer. If the
timer is disabled, the preset forward will NOT work,
and the call will not forward.
Related Programming:
Refer to Preset Call Forward programming, Sec.
630.8.
639-l 0 ISSUE 1, JANUARY 1991