Specifications

630.4
LOUD BELL/CO LINE CONTROL
PROGRAMMING STEPS
If you are in the programming mode, continue using
the program codes. If you are starting to program
here, enter the program mode first.
To program Loud Bell Control/CO Line Control As-
signments, dial an asterisk (*) and [28] on the dial
pad.
If you have a display phone, you will see the follow-
ing:
1. LBC button LED is lit. Press CO line button to
program CO Line contact.
2. Press the button of the contact to be pro-
grammed.
3. Press the LB6 or CO Line button to indicate
which is being programmed.
4. Then press station (LBC) or CO line (CO Line
Control) button to be assigned.
5. When all changes have been made, press the
HOLD button. Confirmation tone will be heard.
LOUD BELL CONTROL
SUB-FIELD BUTTONS
DESCRIPTION
One set of contacts are available to be assigned
either as Loud Bell Control or as CO Line control.
A Loud Bell contact can be assigned to any station
and will follow the ringing assignments of the as-
signed station including tone ringing intercom, recall-
ing and transferred CO lines.
A CO Line Control contact can be assigned to any
CO line. When assigned as CO Line Control, the
contact will be ‘closed’ for the duration of the CO Line
connection.
To remove an LBC or CO Line Control assignment,
toggle OFF the station or CO line and press HOLD.
Confirmation tone will be heard.
Default: By default, there are none assigned.
Related Programming:
Remember to assign ringing to any station pro-
grammed for Loud Bell Control, Sec. 620.3. Also a
station programmed for CO Line Control indication,
must be given that CO line appearance, Sec. 610.5.
CO LINE CONTROL
ISSUE 1, JANUARY 1991
630-7