User guide

Call Coverage 29
2. The Coverage station user then presses their flashing
COVERAGE flexible button,
-or-
Presses the ON/OFF button.
The call is answered and ceases to ring at any other stations
that may have the same coverage appearance. One of the
following messages display after the call is answered.
Non-network system or in same Node:
Network system with call passed across a switch:
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call

SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need
not be physically installed, only the SLT card must be
installed.
CALL FOR STA XXXX
FROM STA YYYY HH:MM:SS
XXXXXXXXX CALLING
YYYYYY HH:MM:SS