Specifications

4-10 Software Upgrade Process
Chapter 4 - Maintenance and Troubleshooting
Software Upgrade Process
Software Upgrade ProcessSoftware Upgrade Process
Software Upgrade Process
Occasionally there may be system software improvements to either fix problems or to
add enhancements.
For information pertaining to software upgrade procedures, refer to
Chapter 13, Upgrades
/ Uploads / Downloads
in the Telenium
IP
System Programming Manual.
ta hw xx (xx = time code)
Time Codes
:
lh = last hour
tp = today peak
tt = today total
yp = yesterday peak
yt = yesterday total
prints hardware usage summary report
ta period (hhmm) xx (xx = time code)
Time Codes
:
lh = last hour
tp = today peak
tt = today total
yp = yesterday peak
yt = yesterday total
prints traffic report periodically
ta period_abort cancels periodic report
x exits the maintenance function (To regain the
password prompt, press [Enter].
? displays the maintenance command list and
descriptions
Warning: Diagnostic / Maintenance Commands in the preceeding table that are marked
with an asterick are not to be used unless specifically instructed to do so by Technical
Support personnel. Unauthorized use of these commands will create fatal errors in
programming that will require lengthy reconstructive efforts.
Diagnostic/Maintenance Commands Descriptions