Specifications

Uses for Gateway RS-232 port 4-3
Chapter 4 - Maintenance and Troubleshooting
Uses for Gateway RS-232 port
Uses for Gateway RS-232 portUses for Gateway RS-232 port
Uses for Gateway RS-232 port
After connecting a serial cable to the RS-232 port on the front of a gateway other than
the MFIM, at password prompt enter, IPKTS.
Main > status = gets user to the status prompt
Main : Status > sicofi sr slave (or master) = switches between master or slave
processors
Monitoring/Diagnostic/Maintenance
Monitoring/Diagnostic/MaintenanceMonitoring/Diagnostic/Maintenance
Monitoring/Diagnostic/Maintenance
Description
DescriptionDescription
Description
The Monitoring/Diagnostic/Maintenance feature provides monitoring, diagnostic, and
maintenance functions. The user can access the IP KTS system and maintain the system
remotely and locally. The system can be accessed via Internet or local RS-232C serial
interface.
Connection
The following sections describe two methods to access the Monitoring/Diagnostic/
Maintenance feature.
Access Via RS-232 Serial Interface
First, connect one end of an RS-232C serial cable to the RS-232C connector on the
MFIM and the other end to the desired Comm Port on the PC.
Figure 4-1: MFIM to PC Connection Configuration
Use a straight-through DB-9 to DB-9 (female to female) cable.
(DB-9) Connection PC Side (DB-9)
11
22
33
44
55
66
77
88
99