Specifications

Module Desk Mount Holder Kit 3-9
Chapter 3 - Installation
Module Desk Mount Holder Kit
To assemble the Desk Mount Holder, refer to the instructions below. Note a Desk Holder
Extender is required for each Module.
1. Place the key-hole slot on the side of the Extender over the key on the side of the
bookend.
2. Slide the Extender and bookend to the locked position.
3. Repeat for additional Extenders and the other bookend.
Once assembled, Modules are simply placed in the Desk Holder "slots". The front of all
Modules should be placed on the same side of the Desk Holder.
Figure 3-6: Module Desk Mount Holder Kit