Specifications

Power Box Installation 3-7
Chapter 3 - Installation
Power Box Installation
The Power Box is designed for Desk or Main Cabinet mounting. To mount the Power Box
to the Main Cabinet, install two brackets with the four self-tapping M4 x 6 mm screws.
These screws must be tightened securely as they also provide for grounding of the
cabinet.
AC/DC Adapters are held in place with a hold-down bracket inside the Power Cabinet.
To install an Adapter:
1. Remove the cover from the Power Box.
2. Loosen the hold-down bracket screws.
3. Insert Adapter in the appropriate slot, assure the DC feed cable is free and at the
front of the Cabinet.
4. Connect the short AC cord to the adapter and Power Box outlet.
5. While applying a slight downward force on the hold-down bracket, tighten the
screws.
6. Replace the Power Cabinet cover.
Figure 3-4: Power Box Installation