Specifications

Main Cabinet 2-15
Chapter 2 - System Components
Main Cabinet
Main CabinetMain Cabinet
Main Cabinet
The Telenium
IP
Main Cabinet (MCAB) has ten slots for modules. The front panel of the
Cabinet is made of a translucent plastic to permit easy viewing of the various status LEDs
on the installed modules. The “window” front panel is hinged to open freely and
incorporates a turnkey, which can be locked to minimize unauthorized access.
Any module can be installed in any of the first nine slots; slot ten is reserved for the MFIM
only. The back plane distributes the telephony terminations to the appropriate RJ-21x
connectors mounted on the back plane. LAN connections are made along with power on
the front of each module.
Cabinet Mounting Options
There are three types of mounting hardware available that allows the Cabinet to be
mounted in a 19” rack, on a desk top, or on a wall. With the Rack or Desk mount
installation; removing the rear panel of the Main Cabinet accesses the RJ-21X connectors
on the back plane. In the Wall mount installation, the Cabinet is connected to the Wall
Mount using a hinge, which allows the Cabinet to swing open for removal of the rear
panel allowing access to the RJ-21X connectors on the back plane.
The 19” Rack, Desk and Wall Mount hardware are shown in the respective illustrations.
Rack Mount
Rack MountRack Mount
Rack Mount
Figure 2-16: 19” Rack Mount Installation