Specifications

IP Keyset AC/DC Adapter 2-13
Chapter 2 - System Components
Figure 2-12: Wall Mount for IP Keysets
IP Keyset AC/DC Adapter
When an IP Keyset or DSS is to be powered from local AC (not provided power over the
LAN), a separate AC/DC adapter must be used for power. The adapter is supplied with a
ten-foot AC cord terminated with the nationally relevant AC blade type. The adapter
supports AC input power systems with rated voltage range of 100-240 VAC @ 50/60 Hz.
The adapter provides 48 VDC at 0.1 amps. The DC output connector is cabled to the
adapter with a ten-foot cable.
Figure 2-13: AC/DC Adapter for Keyset