Specifications

2-10 IP Module - AC/DC Adapter
Chapter 2 - System Components
IP Module - AC/DC Adapter
Each module is packaged with an AC/DC adapter. The adapter is supplied with a
two-meter (six-foot) AC cord terminated with the nationally relevant AC blade type. The
adapter supports AC input power systems with rated voltage range of 100-240 VAC @
50/60 Hz. The adapter provides 48 VDC at 0.8 amps. The DC output connector is cabled
to the adapter with a two-meter (six-foot) cable as shown in the following illustration.
Figure 2-7: AC/DC Adapterfor IP Module
IP Keysets
IP KeysetsIP Keysets
IP Keysets
The Telenium
IP
will work with a number of telephone types including standard SLTs via
SLTM2 and the IP Keysets. The IP Keyset is available in the following configurations:
LAN Ports
LAN PortsLAN Ports
LAN Ports
There are two IP Keyset models (IP-24D and IP-24DH) and a DSS console.
The IP-24D has a single LAN port for connecting to the external 10/100 Base-T LAN.
The IP-24DH model has two LAN ports and thus two RJ-45 connectors. One port is for
connecting to the LAN. The other can be connected to the network-ready PC. The ports
are connected to an intelligent 10/100Base-T switch, which gives LAN access to the data
device while giving priority to voice packets.
DSS Console
DSS ConsoleDSS Console
DSS Console
IP-DSS, which is used to expand the number of Flexible buttons available to a user by
48 buttons, has a single LAN port. When the console is locally powered with the AC/DC
Adapter, the IP DSS can be connected to the 2
nd
LAN port of the IP-24DH.
Table 2-8: IP Keyset Models
Model Description
IP-24D IP Phone 24BTN Display
IP-24DH IP Phone 24BTN Display w/Switched Hub port
IP-DSS IP Phone Direct Station Selection