User guide

82 Speed Dial
STSe Station User Guide August 2005
4. Dial the telephone number and include these special codes:
5. Press SPEED, then replace the handset to end speed bin
programming.
To program multiple speed numbers:
1. Press SPEED + SPEED to conclude programming a number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line
programmed into the speed bin, that line comes up under
the LOOP button or POOL button when accessed.
To erase an existing speed bin:
1. Press SPEED + SPEED.
2. Dial the speed bin location.
3. Then press SPEED again. A confirmation tone will sound.
 SINGLE LINE TELEPHONE
To use speed dial:
1. Lift the handset and dial [668] on the dial pad.
2. Dial a station or system speed bin number (9000-9099).
3. Replace the handset to end the call.
To store speed dial numbers:
1. Lift the handset and dial [661] on the dial pad.
2. Dial the desired station speed number (9000-9019).
3. Dial the telephone number to store.
TRANS Initiates a Pulse-To-Tone switchover
When used as the first entry in the speed bin, this
inserts a non-display character causing numbers
stored in the bin not to appear on the digital
telephone’s display when bin is accessed.
HOLD Inserts a Pause
FLASH Inserts a Flash into the speed number