User guide

Personalized Messages 69
STSe Station User Guide August 2005
To select a pre-assigned message:
1. Dial [633] on the dial pad,
-or-
Press the preprogrammed PERSONAL MESSAGES button.
2. Dial the 2-digit code for the message that displays. A
confirmation tone will sound; DND button LED will flash.
To cancel a pre-assigned message:
1. Either dial the Personal Messages code [633] + [00], dial
[662], or press the DND button.
2. Replace the handset. The DND button LED will extinguish.
Custom Messages
Each station can select from ten possible custom messages to
display on the LCD of a key telephone calling that station. These
messages are programmed from the first Attendant station for
system-wide use.
Each station can also program
three unique custom messages.
To select a custom message:
1. Dial [633] on the dial pad, or press the preprogrammed
PERSONAL MESSAGES button.
2. Dial a valid message number (21-30) for the desired custom
message.
The 1st Attendant should provide a list of messages to each
station user.
00 = (clears msgs) 04 = Return Tomorrow 08 = At Home
01 = On Vacation 05 = Return Next Week 09 = On Break
02 = Return AM 06 = On Trip 10 = At Lunch
03 = Return PM 07 = In Meeting
The Custom Messages feature is not available for use
by Attendant stations.