User guide

26 Call Park
STSe Station User Guide August 2005
Call Park - Station
Call park (by station number) allows external calls to be parked at a
station other than your own.
To park a call:
1. Press TRANS, the call is put on Exclusive Hold.
2. Dial [439], then dial the station number.
-or-
1. Press TRANS, the call is put on Exclusive Hold.
2. Press the preprogrammed CALL PARK (Station) button, then
dial the station number.
To retrieve a parked call:
Dial [# 6] + [the station number used to park the call] from
any telephone in the system, including the initiator’s.
-or-
Dial [438] from the initiator’s station.
To create a CALL PARK (Station) button:
1. Press SPEED + SPEED.
2. Press the desired flexible button.
3. Dial [439] + [#]. A confirmation tone will sound.
 SINGLE LINE TELEPHONE
The SLT user cannot park a call using the Call Park - Station
feature, but can retrieve a Call Park - Station call by using the
[#6] procedure as shown in the digital keyset section above.