User guide

Call Forward 21
STSe Station User Guide August 2005
Call Forward
The Call Forward feature allows a station the ability to have calls
(internal or external) forwarded to a designated station, a UCD
group pilot number, Voice Mail group number, or Hunt group. This
feature must be enabled in admin programming.
To activate Call Forwarding:
1. Lift the handset, or press the ON/OFF button.
2. Press the FWD button or dial [640], then dial the appropriate
forwarding condition code.
[6] = All Calls [8] = Busy
[7] = No Answer [9] = Busy/No Answer
-or-
Use the applicable Soft Key’s ALL-FWD, N/A-FWD, BSY-FWD,
or B/NA-FWD option.
3. Press the DSS button of the desired station,
-or-
Dial the desired extension number where to forward calls,
including UCD, Voice Mail, Hunt Group pilot numbers and
Speed Dial bins for off-net forwarding.
4. Replace the handset, or press the ON/OFF button.
To remove Call Forwarding:
1. Lift the handset, or press the ON/OFF button.
2. Either press the FWD button, dial [640] or [662], or use the
Soft Key’s CLR-FWD option. A confirmation tone sounds and
the FWD LED extinguishes.