User guide

90 Voice Mail
STSe Station User Guide August 2005
Voice Mail Transfer with ID Digits
While on a call and the caller on the other end wishes to leave a
Voice Message for another VM user:
1. At the initiating station, press TRANS.
2. Dial the Voice Mail Group number or press preprogrammed
VM GROUP flexible button.
3. Dial VMID (
mailbox location) of desired party and go on-hook.
Voice Mailbox Button
To program a Mailbox flexible button:
1. Press SPEED + SPEED, then press the desired flexible button
to be programmed.
2. Dial the Mailbox feature code (460-467 = VM locations 1-8).
3. Dial the VMID number.
 SINGLE LINE TELEPHONE
Not applicable
Voice Mail Group Button
To program a VM GROUP flexible button:
1. Press SPEED + SPEED, then press the desired flexible button
to be programmed.
2. Dial a 3-digit VM Group number (440-447=VM groups 1-8).
3. Dial the VMID number.