Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
4-12 Online Administration
Broadcast Message Administration
Broadcast Message Administration
Broadcast Message Administration puts a broadcast message into a mailbox. By default, a
broadcast message goes to every subscriber in the voicemail system. Broadcast Message
Administration plays a currently recorded broadcast message or a new one. A system can have
up to ten broadcast messages (0-9).
Broadcast messages are different from distribution lists in the following ways:
❐ Broadcast messages use less disk space.
❐ A broadcast message automatically enters a subscriber’s mailbox. It plays automatically
when a subscriber goes into their mailbox; the subscriber need not retrieve it.
This prompt plays:
You have x broadcast messages active.
Listen to Message
Plays an existing broadcast message. These prompts play:
Active broadcast messages are:...
Select the message number to play. To repeat selections press [
✳]. When finished, press [#].
Pressing [
✳] repeats the selections. Pressing [#] returns to the Broadcast Message
Administration. Entering a message number plays that message, then returns to Broadcast
Message Administration.
Create New Message
Creates a new broadcast message. These prompts play:
Available broadcast slots are...
Select which message number to create. To repeat selections, press [
✳]. When finished, press
[#].
Pressing [
✳] accesses Create a New Message. Pressing [#] replays the available broadcast slots.
Entering an available broadcast slot plays: